Version information
released May 1st 2019
This version is compatible with:
- ,
Start using this module
Add this module to your Puppetfile:
mod 'bibigon812-quagga', '4.4.0'
Learn more about managing modules with a PuppetfileDocumentation
bibigon812/quagga — version 4.4.0 May 1st 2019
Table of Contents
Module Description
This module provides management of network protocols without restarting services. All resources make changes to the configuration of services using commands, as if you are doing this through the CLI.
Notice
- If you use SELinux set the sebool for Quagga:
setsebool zebra_write_config on
- If you have over 500k routes on CentOS set
UseDNS no
in/etc/ssh/sshd_config
- If you have the FullView on CentOS turn off
NetworkManager
.
systemctl stop NetworkManager
systemctl mask NetworkManager
- Use the default value for the
default_ipv4_unicast
property of thequagga_bgp_router
resource type. - The correct way to delete route-map or prefix-list rules is to use the
ensure: absent
.
quagga::zebra::route_maps:
ROUTE_MAP_IN:
rules:
1:
ensure: absent
action: deny
match: ip address prefix-list ADVERTISED_PREFIXES
Quick Start
Include with default parameters:
include quagga
Zebra Options
SNMP
quagga::zebra::agentx: false
Forwarding
quagga::zebra::global_opts:
ip_forwarding: true
ipv6_forwarding: true
Interfaces
quagga::zebra::interfaces:
eth0:
ip_address:
- 10.0.0.1/24
lo:
ip_address:
- 10.255.255.1/32
- 172.16.255.1/32
Routes
The prefix and the nexthop are namevars.
quagga::zebra::routes:
192.168.0.0/24:
ensure: present
nexthop: 10.0.0.100
distance: 250
192.168.1.0/24 Null0:
ensure: present
distance: 250
192.168.1.0/24 10.0.0.100:
ensure: present
option: reject
distance: 200
Access-Lists
- standard: 1-99, 1300-1999
- extended: 100-199, 2000-2699
- zebra: [[:alpha:]]+
quagga::zebra::access_lists:
1:
remark: Standard access-list
rules:
- permit 127.0.0.1
- deny any
100:
remark: Extended access-list
rules:
- permit ip 10.0.0.0 0.0.0.255 any
- permit ip any 10.0.0.0 0.0.0.255
- deny ip any any
zebra_list:
remark: Zebra access-list
rules:
- permit 10.0.0.0/24
- deny any
Prefix Lists
quagga::zebra::prefix_lists:
CONNECTED_PREFIXES:
rules:
500:
action: permit
le: 32
prefix: 10.255.255.0/24
OSPF_PREFIXES:
rules:
10:
action: permit
prefix: 172.16.255.0/24
Route Maps
quagga::zebra::route_maps:
BGP_FROM_OSPF:
rules:
10:
action: permit
match: ip address prefix-list OSPF_PREFIXES
CONNECTED:
rules:
10:
action: permit
match: ip address prefix-list CONNECTED_PREFIXES
BGP
BGP SNMP
quagga::bgp::agentx: false
BGP Router
quagga::bgp::router:
as_number: 65000
default_ipv4_unicast: false
import_check: true
router_id: 10.0.0.1
keepalive: 3
holdtime: 9
BGP Address Families
quagga::bgp::address_families:
ipv4_unicast:
aggregate_address:
- 1.1.1.0/24 summary-only
- 1.1.2.0/24 summary-only
maximum_ebgp_paths: 2
maximum_ibgp_paths: 10
networks:
- 1.1.1.0/23
- 1.1.3.0/24
ipv4_multicast:
networks:
- 230.0.0.0/8
- 231.0.0.0/8
ipv6_unicast:
aggregate_address:
- 2001:db8:0:2::/64
- 2001:db8:0:3::/64
networks:
- 2001:db8::/64
- 2001:db8:0:1::/64
- 2001:db8:0:2::/63
BGP Peers
quagga::bgp::peers:
CLIENTS:
passive: true
address_families:
ipv4_unicast:
activate: true
default_originate: true
INTERNAL:
remote_as: 65000
password: QWRF$345!#@$
update_source: 10.0.0.1
address_families:
ipv4_unicast:
activate: true
next_hop_self: true
10.0.0.2:
peer_group: INTERNAL
address_families:
ipv4_unicast:
peer_group: INTERNAL
10.0.0.3:
peer_group: INTERNAL
address_families:
ipv4_unicast:
peer_group: INTERNAL
10.0.0.10:
peer_group: INTERNAL
address_families:
ipv4_multicast:
activate: true
172.16.0.2:
peer_group: CLIENTS
remote_as: 65001
address_families:
ipv4_unicast:
peer_group: CLIENTS
BGP AS-Paths
quagga::bgp::as_paths:
FROM_AS100:
rules:
- permit _100$
BGP Community Lists
quagga::bgp::community_lists:
100:
rules:
- permit 65000:101
- permit 65000:102
- permit 65000:103
200:
rules:
- permit 65000:201
- permit 65000:202
OSPF
OSPF SNMP
quagga::ospf::agentx: false
OSPF Router
quagga::ospf::router:
distribute_list:
- ACCESS_LIST out kernel
- ACCESS_LIST out isis
log_adjacency_changes: true
opaque: false
passive_interfaces:
- eth0
- eth1
redistribute:
- connected route-map CONNECTED
rfc1583: false
router_id: 10.0.0.1
OSPF Areas
quagga::ospf::areas:
0.0.0.0:
networks:
- 172.16.0.0/24
- 192.168.0.0/24
ranges:
1.1.1.1/32:
substitute: 1.1.1.0/24
0.0.0.1:
networks:
- 172.16.1.0/24
- 192.168.1.0/24
stub: true
OSPF Interfaces
quagga::ospf::interfaces:
eth0:
dead_interval: 8
hello_interval: 2
mtu_ignore: true
priority: 100
PIM
PIM SNMP
quagga::pim::agentx: false
PIM Router
quagga::pim::router:
ip_multicast_routing: true
PIM Interfaces
quagga::pim::interfaces:
eth0:
igmp: true
multicast: true
pim_ssm: true
Reference
Classes
quagga
default_owner
: overrides the default owner of Quagga configuration files in the file system. Defaults toquagga
.default_group
: overrides the default group of Quagga configuration files in the file system. Defaults toquagga
.default_mode
: overrides the default mode of Quagga configuration files in the system. Defaults to0600
.default_content
: overrides the initial content of quagga configuration files.service_file
: overrides the default path of the Quagga system configuration file in the file system.service_file_manage
: enable management of the service file. Defaults totrue
.packages
: Quagga package options.
quagga::bgp
agentx
: enable agentx. Defaults tofalse
.config_file
: configuration file if the BGP service.config_file_manage
: enable management of the BGP service setting file.service_name
: the name of the BGP service.service_enable
: enable the BGP service.service_manage
: enable management of the BGP service.service_ensure
: the state of the BGP Service.service_opts
: service start options.router
: BGP router options. See the typequagga_bgp_router
.peers
: BGP peer options. See the typequagga_bgp_peer
.as_paths
: as-path options. See the typequagga_bgp_as_path
.community_lists
: community-list options. See the typequagga_bgp_community_list
.address_families
: BGP address-family options. See the typequagga_bgp_address_family
.
quagga::ospf
agentx
: enable agentx. Defaults tofalse
.config_file
: configuration file if the OSPF service.config_file_manage
: enable management of the OSPF service setting file.service_name
: the name of the OSPF service.service_enable
: enable the OSPF service.service_manage
: enable management of the OSPF service.service_ensure
: the state of the OSPF Service.service_opts
: service start options.router
: OSPF router options. See the typequagga_ospf_router
.areas
: OSPF area options. See the typequagga_ospf_area
.interfaces
: OSPF parameters of interfaces. See the typequagga_ospf_interface
.
quagga::ospf::area
- See
quagga_ospf_area
. ranges
: OSPF ranges. Seequagga_ospf_area_range
.
quagga::pim
agentx
: enable agentx. Defaults tofalse
.config_file
: configuration file if the PIM service.config_file_manage
: enable management of the PIM service setting file.service_name
: the name of the PIM service.service_enable
: enable the PIM service.service_manage
: enable management of the PIM service.service_ensure
: the state of the PIM Service.service_opts
: service start options.router
: PIM router options. See the typequagga_pim_router
.interfaces
: OSPF parameters of interfaces. See the typequagga_pim_interface
.
quagga::zebra
agentx
: enable agentx. Defaults tofalse
.hostname
: Quagga router hostname. Defaults to FQDN.global_opts
: Quagga global options. See the typequagga_global
.interfaces
: Quagga interfacec options. See the typequagga_interface
.prefix_lists
: Quagga prefix-list options. See the typequagga_prefix_list
.route_maps
: Quagga route-map options. See the typequagga_rotue_map
.routes
: parameters of the static routes. See the typequagga_static_route
.access_lists
: parameters of the access-lists. See the typequagga_access_list
.config_file
: configuration file if the Zebra service.config_file_manage
: enable management of the Zebra service setting file.service_name
: the name of the Zebra service.service_enable
: enable the Zebra service.service_manage
: enable management of the Zebra service.service_ensure
: the state of the Zebra Service.service_opts
: service start options.
Defines
quagga::bgp::peer
See types quagga_bgp_peer
and quagga_bgp_peer_address_family
.
Types
quagga_as_path
quagga_as_path { 'TEST_AS_PATH':
ensure => present,
rules => [
'permit _100$',
'permit _100_',
],
}
name
: the name of the as-path access-list.ensure
: manage the state of this as-path list:absent
,present
.rules
: the list of rules.
quagga_bgp_router
quagga_bgp_router { 'bgp':
ensure => present,
as_number => 65000,
import_check => true,
default_ipv4_unicast => false,
default_local_preference => 100,
redistribute => [ 'ospf route-map BGP_FROM_OSPF', ],
router_id => '192.168.1.1',
keepalive => 3,
holdtime => 9,
}
name
: the instance name.ensure
: manage the state of this BGP router:absent
,present
.as_number
: the number of the AS.import_check
: check BGP network route exists in IGP. Defaults tofalse
.default_ipv4_unicast
: activate ipv4-unicast for a peer by default. Defaults tofalse
.default_local_preference
: default local preference. Defaults to100
.redistribute
: redistribute information from another routing protocol.router_id
: override configured router identifier.keepalive
: the default bgp peer keepalive interval. Defaults to3
.holdtime
: the default bgp peer holdtime. Defaults to9
.
quagga_bgp_address_family
quagga_bgp_address_family { 'ipv4_unicast':
aggregate_address => '192.168.0.0/24 summary-only',
maximum_ebgp_paths => 2,
maximum_ibgp_paths => 2,
networks => ['192.168.0.0/24', '172.16.0.0/24',],
}
quagga_bgp_address_family { 'ipv4_multicast':
aggregate_address => '230.0.0.0/8 summary-only',
networks => [ '230.0.0.0/8', '231.0.0.0/8', ],
}
name
: the address family.aggregate_address
: configure BGP aggregate entries.maximum_ebgp_paths
: forward packets over multiple ebgp paths.maximum_ibgp_paths
: forward packets over multiple ibgp paths.networks
: specify a network to announce via BGP.
quagga_bgp_peer
quagga_bgp_peer { '192.168.1.1':
ensure => present,
peer_group => 'internal_peers',
}
quagga_bgp_peer { 'internal_peers':
ensure => present,
local_as => 65000,
password => 'QWRF$345!#@$',
peer_group => true,
remote_as => 65000,
}
name
: a neighbor IP address or a peer-group name.ensure
: manage the state of this BGP neighbor:absent
,present
: Defaults topresent
.local_as
: specify a local-as number.passive
: don't send open messages to this neighbor. Defaults tofalse
.password
: set a password.peer_group
: member of the peer-group.remote_as
: specify a BGP neighbor AS.shutdown
: administratively shut down this neighbor. Defaults tofalse
.update_source
: source of routing updates.
quagga_bgp_peer_address_family
quagga_bgp_peer_address_family { '192.168.0.2 ipv4_unicast':
peer_group => PEER_GROUP,
activate => true,
allow_as_in => 1,
default_originate => true,
maximum_prefix => 500000,
next_hop_self => true,
prefix_list_in => PREFIX_LIST,
prefix_list_out => PREFIX_LIST,
remove_private_as => true,
route_map_export => ROUTE_MAP,
route_map_import => ROUTE_MAP,
route_map_in => ROUTE_MAP,
route_map_out => ROUTE_MAP,
route_reflector_client => false,
route_server_client => false,
send_community => 'both',
}
name
: contains peer and address family names separated by space.ensure
: manage the state of this BGP neighbor:absent
,present
: Defaults topresent
.activate
: enable the Address Family for this Neighbor. Defaults totrue
.allow_as_in
: accept as-path with my AS present in it.default_originate
: originate default route to this neighbor. Defaults tofalse
.next_hop_self
: disable the next hop calculation for this neighbor. Defaults tofalse
.peer_group
: member of the peer-group.prefix_list_in
: filter updates from this neighbor.prefix_list_out
: filter updates to this neighbor.route_map_export
: apply map to routes coming from a Route-Server client.route_map_import
: apply map to routes going into a Route-Server client's table.route_map_in
: apply map to incoming routes.route_map_out
: apply map to outbound routes.route_reflector_client
: configure a neighbor as Route Reflector client. Defaults tofalse
.route_server_client
: configure a neighbor as Route Server client. Defaults tofalse
.
quagga_community_list
quagga_community_list { '100':
ensure => present,
rules => [
'permit 65000:50952',
'permit 65000:31500',
],
}
name
: community list number.ensure
: manage the state of this community list:absent
,present
: Defaults topresent
.rules
: the list of rules.
quagga_global
quagga_global { 'router-1.sandbox.local':
password => 'password',
enable_password => 'enable_password',
ip_forwarding => true,
ipv6_forwarding => true,
line_vty => true,
service_password_encryption => true,
}
name
: router instance name.hostname
: router hostname. Defaults toname
.password
: set password for vty interface. If there is no password, a vty won’t accept connections.enable_password
: set enable password.ip_forwarding
: enable IP forwarding. Defaults tofalse
.ipv6_forwarding
: enable IPv6 forwarding. Defaults tofalse
.line_vty
: enter vty configuration mode. Defaults totrue
.service_password_encryption
: encrypt passwords. Defaults tofalse
.
quagga_interface
quagga_interface { 'eth0':
igmp => true,
ip_address => [ '10.0.0.1/24', '172.16.0.1/24', ],
}
name
: the friendly name of the network interface.bandwidth
: set bandwidth value of the interface in kilobits/sec.description
: interface description.enable
: whether the interface should be enabled or notip_address
: IP addresses. Defaults to[]
.link_detect
: enable link state detection. Defaults tofalse
.
quagga_ospf_interface
quagga_ospf_interface { 'eth0':
auth => 'message-digest',
message_digest_key => '1 md5 MESSAGEDIGEST',
mtu_ignore => true,
hello_interval => 2,
dead_interval => 8,
}
name
: the friendly name of the network interface.auth
: interface authentication type:absent
,message-digest
. Defaults toabsent
.message_digest_key
: set OSPF authentication key to a cryptographic password:absent
,KEYID md5 KEY
. Defaults toabsent
.cost
: interface cost. Defaults toabsent
.dead_interval
: interval after which a neighbor is declared dead. Defaults to40
.hello_interval
: time between HELLO packets. Defaults to10
.mtu_ignore
: disable mtu mismatch detection. Defaults tofalse
.network
: network type:absent
,broadcast
,non-broadcast
,point-to-multipoint
,point-to-point
orloopback
: Defaults toabsent
.priority
: router priority. Defaults to1
.retransmit_interval
: time between retransmitting lost link state advertisements. Defaults to5
.transmit_delay
: link state transmit delay. Defaults to1
.
quagga_pim_router
quagga_pim_router { 'pim':
ip_multicast_routing => true
}
name
: the name must bepim
.ip_multicast_routing
: enable IP multicast forwarding. Defaults tofalse
.
quagga_pim_interface
quagga_interface { 'eth0':
igmp => true,
multicast => true,
pim_ssm => true,
}
name
: the friendly name of the network interface.igmp
: enable IGMP. Defaults tofalse
.igmp_query_interval
: IGMP query interval. Defaults to125
.igmp_query_max_response_time_dsec
: IGMP maximum query response time in deciseconds. Defaults to100
.multicast
: enable multicast flag for the interface. Defaults tofalse
.pim_ssm
: enable PIM SSM operation. Defaults tofalse
.
quagga_ospf_router
quagga_ospf_router { 'ospf':
ensure => present,
abr_type => 'cisco',
distribute_list => [ 'ACCESS_LIST out bgp', 'ACCESS_LIST out static', ],
opaque => true,
passive_interfaces => [ 'eth0', 'eth1', ],
redistribute => [ 'connected', 'static route-map STATIC', ],
rfc1583 => true,
router_id => '10.0.0.1',
}
name
: the name must beospf
.ensure
: manage the state of this OSPF router:absent
,present
. Defaults topresent
.abr_type
: set OSPF ABR type. Defaults tocisco
.distribute_list
: Filter networks in routing updates. Defaults to[]
.log_adjacency_changes
: log changes in adjacency. Defaults tofalse
.opaque
: enable the Opaque-LSA capability (rfc2370). Defaults tofalse
.passive_interfaces
: Suppress routing updates on interfaces. Defaults to[]
.redistribute
: redistribute information from another routing protocol.rfc1583
: enable the RFC1583Compatibility flag. Defaults tofalse
.router_id
: Router-id for the OSPF process.
quagga_ospf_area
quagga_ospf_area { '0.0.0.0':
ensure => present,
network => [ '10.0.0.0/8', '172.16.0.0/12', '192.168.0.0/16' ],
}
name
: the OSPF area.ensure
: manage the state of this OSPF area:absent
,present
: Defaults topresent
.access_list_expor
: set the filter for networks announced to other areas.access_list_import
: set the filter for networks from other areas announced to the specified one.prefix_list_export
: filter networks sent from this area.prefix_list_import
: filter networks sent to this area.networks
: enable routing on an IP network. Defaults to[]
.auth
: enable authentication on this area:false
,true
,message-digest
: Defaults tofalse
.stub
: . configure the area to be a stub area:false
,true
,no-summary
: Defaults tofalse
.
qugga_ospf_area_range
quagga_ospf_area_range { '0.0.0.0 10.0.0.0/8':
substitute: '10.0.0.0/8',
}
name
: contains an OSPF area id and range.advertise
: Advertise this range. Defaults totrue
.cost
: User specified metric for this range.substitute
: Network prefix to be announced instead of range.
quagga_prefix_list
The prefix_list resource is a single sequence. You can use a chain of resources to describe comlpex prefix lists, for example:
quagga_prefix_list {'ADVERTISED_PREFIXES 10':
ensure => present,
action => 'permit',
prefix => '192.168.0.0/16',
le => 24,
}
quagga_prefix_list {'ADVERTISED_PREFIXES 20':
ensure => present,
action => 'permit',
prefix => '172.16.0.0/12',
le => 24,
}
name
: name of the prefix-list and sequence number.ensure
: manage the state of this prefix list:absent
,present
: Defaults topresent
.action
: action can bepermit
ordeny
.ge
: minimum prefix length to be matched.le
: maximum prefix length to be matched.prefix
: IP prefix<network>/<length>
.proto
: IP protocol version:ip
,ipv6
: Defaults toip
.
quagga_route_map
The route_map resource is a single sequence. You can use a chain of resources to describe complex route maps, for example:
quagga_route_map { 'bgp_out 10':
ensure => present,
action => 'permit',
match => 'ip address prefix-list ADVERTISED-PREFIXES'
on_match => 'goto 65000',
}
quagga_route_map { 'bgp_out 99':
ensure => present,
action => 'deny',
}
quagga_route_map { 'bgp_out 65000':
ensure => present,
action => 'permit',
match => [
'as-path AS_PATH_LIST',
'community 100',
'community 300 exact-match',
'extcommunity 200',
'interface eth0',
'ip address 100',
'ip next-hop ACCESS_LIST',
'ip route-source prefix-list PREFIX_LIST',
'ipv6 address IPV6_ACCESS_LIST',
'ipv6 next-hop prefix-list IPV6_PREFIX_LIST',
'local-preference 1000',
'metric 0',
'origin igp',
'origin egp',
'origin incomplete',
'peer 1.1.1.1',
'peer 100',
'peer local',
'probability 50',
'tag 100',
],
on_match => 'next',
set => [
'aggregator as 65000',
'as-path exclude 100 200',
'as-path prepend 100 100 100',
'as-path prepend last-as 5',
'atomic-aggregate',
'comm-list 100 delete',
'community 0:666 additive',
'community none',
'forwarding address 1fff::',
'ip next-hop 1.1.1.1',
'ip next-hop peer-address',
'ipv6 next-hop global 1::',
'ipv6 next-hop local 1::',
'ipv6 next-hop peer-address',
'local-preference 1000',
'metric 0',
'metric-type type-1',
'origin egp',
'origin igp',
'origin incomplete',
'originator-id 1.1.1.1',
'src 1.1.1.1',
'tag 100',
'vpn4 next-hop 1.1.1.1',
'weight 100',
],
}
name
: name of the route-map and sequence number of rule.action
: route map actions:deny
,permit
.ensure
: manage the state of this route map:absent
,present
: Defaults topresent
.match
: match values from routing table. Defaults to[]
.on_match
: exit policy on matches.set
: set values in destination routing protocol. Defaults to[]
.
quagga_static_route
quagga_static_route { '10.0.0.0/24':
ensure => present,
nexthop => '1.1.1.1',
option => 'reject',
distance => 250,
}
quagga_static_route { '192.168.0.0/24 1.1.1.1':
ensure => present,
distance => 250,
}
prefix
: namevar. IP destination prefix.nexthop
: namevar. Specifies IP or the interface name of the nexthop router. Defaults toNull0
.distance
: Specifies the distance value for this route. Values are1-255
.option
: Sets reject or blackhole for this route. Values arereject
andblackhole
.
quagga_access_list
quagga_access_list {'1':
ensure => present,
remark => 'IP standard access list',
rules => [
'deny 10.0.0.128 0.0.0.127',
'deny 10.0.101.193',
'permit 10.0.0.0 0.0.255.255',
'permit 192.168.10.1'.
'deny any'
]
}
quagga_access_list {'100':
ensure => present,
remark => 'IP extended access-list',
rules => [
'deny ip host 10.0.1.100 any',
'permit ip 10.0.1.0 0.0.0.255 any',
'deny ip any any'
]
}
quagga_access_list {'a_word':
ensure => present,
remark => 'IP zebra access-list',
rules => [
'deny 192.168.0.0/23',,
'permit 192.168.0.0/16',
'deny any',
]
}
name
: The number of this access list.remark
: Specifies the remark for this access-list.rules
: Permits and denies for this rule. Defaults to [].
Types in this module release
Changelog
[4.4.0] - 2019-05-02
Added
- bgp timers
[4.3.1] - 2018-05-21
Fixed
- the error:
Error: Failed to apply catalog: undefined method `fletten' for []:Array
[4.3.0] - 2018-03-14
Added
- password supporting for bgp sessions
[4.2.2] - 2018-01-31
Fixed
- the prefix-list's search pattern
[4.2.1] - 2018-01-30
Fixed
- the ipv6 prefix validation of a quagga_prefix_list
[4.2.0] - 2017-12-25
Added
- ospf area ranges
[4.1.4] - 2017-12-01
Fixed
- the community-list instantiation
[4.1.3] - 2017-12-01
Changed
- a rule pattern of a community-list
Fixed
- module building
[4.1.2] - 2017-11-02
Fixed
- clearing the empty resource
quagga_bgp_peer_address_family
[4.1.1] - 2017-09-30
Updated
- the regexp of the as-path list rule
[4.1.0] - 2017-09-13
Added
- snmp support
[4.0.1] - 2017-09-04
Added
- tags in the file
metadata.json
[4.0.0] - 2017-08-26
Added
- the
quagga::zebra::hostname
Changed
- the
quagga::prefix_lists
to thequagga::zebra::prefix_lists
- the
quagga::route_maps
to thequagga::zebra::route_maps
[3.5.1] - 2017-08-23
Added
- the property
distribute_list
to the resource typequagga_ospf_router
[3.5.0] - 2017-08-22
Added
- the resource type
quagga_access_list
[3.4.0] - 2017-08-21
Added
- the resource type
quagga_static_route
- the property
passive_interfaces
to the resource typequagga_ospf_router
[3.3.0] - 2017-07-19
Added
- autosubscribe methods in the quagga_bgp_peer_address_family resource type
Updated
- docs
[3.2.3] - 2017-07-14
Fixed
- property validations of the
quagga_bgp_peer_address_family
resource type.
[3.2.2] - 2017-07-13
Fixed
- getting an AS number in resources
quagga_bgp_peer
andquagga_bgp_peer_address_family
- getting a BGP router-id in the resource
quagga_bgp_router
Removed
- retrieving the
activate
value in the provider of the resourcequagga_bgp_peer_address_family
[3.2.1] - 2017-07-13
Fixed
- changing the resource
quagga_route_map
[3.2.0] - 2017-07-13
Added
- the new resource type
quagga_pim_router
Changed
- split PIM router settings
Removed
- the property
ip_multicast_routing
from the resourcequagga_global
[3.1.0] - 2017-07-12
Added
- the
quagga_ospf_interface
resource - the
quagga_pim_interface
resource
Updated
- the
quagga::ospf
class - the
quagga::pim
class
Removed
- ospf and multicast settings from
quagga_interface
resource
[3.0.2] - 2017-07-12
Fixed
- applying the OSPF configuration
- the lint warning about only_variable_string
- autorequire
quagga_ospf_router
in thequagga_ospf_area
resource
Updated
- changelog
- docs
[3.0.1] - 2017-07-12
Fixed
- the lint warning when creating the resource
quagga_global
- the creating the resource
quagga_interface
Updated
- docs
[3.0.0] - 2017-07-11
Added
- the resource
quagga_bgp_address_family
- the resource
quagga_bgp_peer_address_family
- the property
as_number
to the resourcequagga_bgp_router
- the true hiera support
- many classes that are wrappers for resources
quagga_*
Changed
- changelog
- the resource
quagga_bgp
toquagga_bgp_router
- names of resources
quagga_route_map
,quagga_prefix_list
- the resource
quagga_bgp
toquagga_bgp_router
- resources
quagga_bgp_router
,quagga_bgp_peer
Removed
- the resource
quagga_redistribution
Updated
- dependencies
[2.0.3] - 2017-06-27
Added
- tests
Fixed
- a name validation of the type
quagga_bgp_peer
Updated
- docs
- changelog
[2.0.2] - 2017-06-26
Fixed
- creating the resource
quagga_bgp_peer
Updated
- the provider of the type
quagga_bgp_peer
[2.0.1] - 2017-06-26
Fixed
- the router_id default value of the type
quagga_bgp
[2.0.0] - 2017-06-26
Added
- multicast-routing by @m4ce
- the resource
quagga_router
by @m4ce - the property
networks
to the resourcequagga_bgp
- tests
quagga_ip
properties to the resourcequagga_system
- the property
action
to the resourcequagga_route_map
- wrappers for resources
- hiera support
- the property
redistribute
to the resourcequagga_ospf
- the property
redistribute
to the resourcequagga_bgp
- the property
default_originate
to the resourcequagga_ospf
Changed
- boolean values of variables to
true
orfalse
in resourcebgp*
,ospf*
- types
ospf_interface
andpim_interface
toquagga_interface
- the type
as_path
toquagga_as_path
- a syntax of
quagga_as_path
rules - the type
bgp
toquagga_bgp
- the type
bgp_neighbor
toquagga_bgp_peer
- the type
bgp_network
toquagga_bgp_network
- the type
quagga_router
toquagga_system
- the type
community_list
toquagga_community_list
- a syntax of
quagga_community_list
rules - the type
ospf_area
toquagga_ospf_area
- the type
prefix_list
toquagga_prefix_list
- the type
redistribution
toquagga_redistribution
- the type
route_map
toquagga_route_map
- the name of the resource
quagga_route_map
- the property
ipaddress
toip_address
of the resourcequagga_interface
Deprecated
- the type
quagga_redistribution
Removed
- the method
purge
from resourcesbgp*
- the resource
quagga_bgp_network
- properties
default_cost
andstub
fromquagga_ospf_area
- the resource
quagga_ip
Updated
- changelog
- docs
[1.2.1] - 2017-06-07
Added
- pim support by @m4ce
Fixed
- the ipv6 support of the resource
bgp_network
[1.1.4] - 2017-06-05
Added
- the property
update_source
to the resourcebgp_neighbor
Updated
- docs
[1.1.3] - 2017-06-01
Fixed
- creation of the resource
ospf
Removed
- the property
reference_bandwidth
from the provider
Updated
- the method
flush
of the resourceospf
[1.1.2] - 2017-06-01
Fixed
- removing of
bgp
andbgp_neighbor
resources - the
flush
method in theospf
resource
Removed
- an unused code
Updated
- changelog
- proxy classes
[1.1.1] - 2017-05-31
Fixed
- NilClass in flush methods
- errors on creating all resources
Updated
- docs
- the ensurable method in types
- changelog
[1.1.0] - 2017-05-31
Fixed
- reading the activate property of the bgp_neighbor resource
Removed
- the shortcut property of the ospf_area type
Updated
- docs
- changelog
[1.0.5] - 2017-05-30
Added
- a default value of the activate property of the bgp_neighbor resource
Fixed
- an instantiation of the bgp_neighbor resource
- removing the allow_as_in property of the bgp_neighbor resource
Updated
- changelog
[1.0.4] - 2017-05-30
Fixed
- an instantiation of the ospf resource
Removed
- a default value of the activate property of the bgp_neighbor resource
[1.0.3] - 2017-05-30
Fixed
- typos
- autorequires in bgp_netighbor and bgp_network resources
Updated
- docs
- changelog
[1.0.2] - 2017-05-30
Added
- proxy classes to use hiera
Updated
- changelog
- docs
Fixed
- a control of services
[1.0.1] - 2017-05-29
Changed
- values of the stub property
Updated
- changelog
- docs
[1.0.0] - 2017-05-29
Added
- the ospf_interface type
- the quagga provider of the ospf_interface type
- the ospf type
- the quagga provider of the ospf type
- the ospf_area type and a provider for it
- the redistribution type and a provider for it
- the as_path type and a provider for it
- the community_list type and a provider for it
- the prefix_list type and a provider for it
- the route_map type and a provider for it
- the bgp type and a provider for it
- the bgp_neighbor type and a provider for it
- the bgp_network type and a provider for it
Updated
- changelog
- docs
Dependencies
- puppetlabs-stdlib (>= 4.10.0 < 7.0.0)
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License. "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types. "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below). "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof. "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions: (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and (b) You must cause any modified files to carry prominent notices stating that You changed the files; and (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file. 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. 9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability. END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "{}" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives. Copyright {yyyy} {name of copyright owner} Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.